ACETECH Lighter BT Adapter M14+ – 14 mm Clockwise Thread
ACETECH M14+ adapter for the Lighter BT tracer unit: fits it to a gun with a 14 mm clockwise thread. Swaps in under the fixing ring.
Your Lighter BT on an M14+ thread
The Lighter BT comes with an M14− and an M11+ adapter. This M14+ adapter lets you fit it to a gun with a 14 mm clockwise thread instead. It sits at the back of the unit, under the fixing ring.
Brand ACETECHPart PAD0014-S-001Fits Lighter BT
- Thread
- M14+14 mm, clockwise
- Made for
- Lighter BTnot the Lighter BT FLAT body
- Held by
- Fixing ringat the back of the unit
- Barrel
- ≤ 12 mmpast the end of the thread
- In the box
- 1 ×M14+ adapter
- Made in
- Taiwan
Which adapter does your gun need?
The thread on your gun decides. “+” turns clockwise to tighten, “−” turns counter-clockwise. Your gun's manual gives the thread.
| Your thread | Lighter BT box | Adapter |
|---|---|---|
| M11+11 mm, clockwise | In the Lighter BT box. | Adapter M11+ · €5.00 |
| M14−14 mm, counter-clockwise | In the Lighter BT box. | Adapter M14− · €10.00 |
| M14+14 mm, clockwise | Not in the Lighter BT box: buy it here. | You are here · €10.00 |
| M16+16 mm, clockwise | Not in the Lighter BT box. | Set M16+ and M14+ · €20.00 |
Swap it in at the back
The adapter sits between the fixing ring and the Lighter BT body. The steps are from the Lighter BT manual.
Measure from the front end of the thread to the tip of the barrel.
Loosen the ring
Turn the fixing ring at the back of the Lighter BT counter-clockwise and take out the adapter that is in it.
Fit the M14+
Put the M14+ adapter in its place, then tighten the fixing ring again.
Screw it on
Switch the Lighter BT on, then screw it onto the front of your barrel and tighten it, turning clockwise.
In the box
- 1 × M14+ adapter · in an ACETECH box
Made in Taiwan. ACETECH part PAD0014-S-001. For airsoft only.
Not included
- The Lighter BT tracer unit
- Fit on the Lighter BT FLAT body · it does not fit
- The fixing ring · it stays on your Lighter BT
Need the tracer unit? See our tracer units.
Other Lighter BT adapters
One adapter for each thread. The set gives you M16+ and M14+ together.
Adapter M14+
14 mm clockwise. For the Lighter BT.
Adapter set M16+ and M14+
One M16+ and one M14+ adapter. For guns with a 16 mm clockwise thread.
ACETECHAdapter M14−
14 mm counter-clockwise. A spare for the one in the Lighter BT box.
ACETECHAdapter M11+
11 mm clockwise. A spare for the one in the Lighter BT box.
Safety: Airsoft guns are not toys. Never look into the muzzle, and everyone on the field must wear eye protection.
All spare parts