The tracer inside the FMG9
AGENT is ACETECH's tracer made for the FMG9 folding kit, and it only fits the FMG9. It sits inside the kit in front of the muzzle, so nothing shows on the outside. It lights green and red tracer BBs and flashes a muzzle flash with every shot, in 3 modes.
Brand ACETECHShell 3D-printed, blackMade in Taiwan
- Fits
- FMG9 onlyinside the kit, in front of the muzzle
- Size
- 50.5 × 28 × 35.3 mmlength × width × height
- Weight
- 29 g3D-printed shell
- BBs
- Red + green tracerthe flash works with standard BBs; not gel
- Modes
- 3tracer + flash, flash, tracer
- Charging
- USB-CLi-ion battery
Flash, tracer or both
The tracer makes green and red tracer BBs glow. The flash lights the muzzle with every shot, with standard BBs too. The more gas there is around the muzzle, the stronger the flash looks.
| Mode | Key light | What you see |
|---|---|---|
| Tracer + flash | ● | Tracer BBs glow and the muzzle flashes with every shot. |
| Flash only | ●● | Only the muzzle flash. Works with standard BBs too. |
| Tracer only | ●●● | Only the tracer: tracer BBs glow, no flash. |
Hold the key 3 seconds while AGENT is on to go to the next mode. Not for gel BBs.
Made for the FMG9
AGENT fits the FMG9 folding kit and nothing else. It doesn't screw onto a thread: it drops into the space in front of the muzzle, inside the kit.
Charge it
Charge over USB-C at the back. Give it a full charge the first time.
Open the FMG9
Open the top cover of the FMG9 kit.
Switch on, drop in
Switch AGENT on and put it in the space in front of the muzzle.
Close the cover
Close the top cover. AGENT stays inside, nothing shows on the outside.
Not an FMG9?
AGENT only fits the FMG9. For a gun with a 14 mm counter-clockwise thread, pick a tracer that screws on, such as Bifrost R or Brighter R. See all tracer units.
Not sure your FMG9 kit has room in front of the muzzle? Ask us before you order.
BBs
- Green tracer BBs · tracer + flash
- Red tracer BBs · tracer + flash
- Standard BBs · flash only
- Gel BBs · not supported: AGENT is not water resistant
Need tracer BBs? See our tracer BB balls.
3D-printed, keep it cool
The AGENT shell is 3D-printed. Heat can bend it out of shape, and water can get inside.
Keep AGENT below 60 °C. Don't leave it anywhere that gets that hot, such as under a car windscreen in the sun.
Keep it dry
- Not water resistant
- No gel BBs
- Charge it at least every 2 months · when you don't use it
One key, shake it awake
One key switches AGENT on and off and changes the mode. After 5 minutes without movement it sleeps, and a shake wakes it again.
Power / mode key
- Click · switch on or off
- Switching on · one short beep
- Switching off · three short beeps
- Hold 3 seconds while on · next mode
- Remembers · your last mode
Power
- Sleeps after 5 minutes idle · wakes when you shake it
- Switched off with the key? · shaking won't wake it: click the key
- Low battery · red light and 3 flashes from the flame LEDs, then it switches off
- Stored? · charge it at least every 2 months
- Self-test · switched off, hold the key 6 seconds: green = pass, red = fail
Charge with a USB-C cable. The light pulses while AGENT charges and goes off when it is full.
In the box
- AGENT · tracer unit
- User manual
Checked
- FCC, CE and RoHS
- Made in Taiwan
Which tracer?
AGENT is only for the FMG9. For a threaded muzzle, these tracers screw on.
AGENT
Sits inside the FMG9 kit: muzzle flash plus red and green tracer BBs. 29 g, USB-C.
You are hereBifrost R
11 colour flame modes, standard, green and red tracer BBs. 14 mm CCW, M11+ with the adaptor.
ACETECH · Red + green, compactBrighter R
No flash, 57 × 28 mm and 33.2 g. Shake to wake. 14 mm CCW.
ACETECH · Green, compactBrighter C
Green tracer, 57 × 28 mm and 32 g. Shake to wake. 14 mm CCW.
Safety: Airsoft guns are not toys. Everyone on the field must wear eye protection. Never look into the barrel.
All tracer units