ACETECH Raider + Blaster M Tracer, 14mm CCW
ACETECH Raider tracer unit with Blaster M module: muzzle flash and green tracer in 3 modes, 14 mm CCW thread, up to 35 RPS, Micro-USB charging.
Breach the dark
Raider is an aluminium tracer unit shaped like a breaching muzzle brake. It screws onto a 14 mm counter-clockwise thread, and the Blaster M module inside lights green tracer BBs and flashes a muzzle flash as each BB leaves.
Brand ACETECHModule Blaster MMade in Taiwan
- Thread
- 14 mm CCWM14−, screws on
- Size
- 96 × 39.2 mmlength × diameter
- Weight
- 150 gBlaster M module 31 g
- Modes
- 3tracer, flame or both
- Per charge
- 24 000shots in tracer-only mode
- Charging
- 2.5 hMicro-USB
Three modes, one module
Blaster M lights green tracer BBs with its UV LED and flashes a muzzle flash as each BB leaves. The more gas or water mist around the muzzle, the stronger the flash looks.
| Mode | Shots per charge | Release after |
|---|---|---|
| Tracer with flame | 12 000 | 1 beep |
| Flame only | 12 000 | 2 beeps |
| Tracer only | 24 000 | 3 beeps |
To change mode, take Blaster M out of Raider, then long-press its button while it is on and release after the number of beeps shown.
Four steps onto M14−
Raider screws onto a 14 mm counter-clockwise thread. Check your inner barrel first: Blaster M needs it to stop short of the sensor.
Check the barrel
The inner barrel must stick out less than 10 mm past the end of the thread. Longer, and it covers the Blaster M sensor.
Charge Blaster M
Take the module out of Raider, turn its lid anticlockwise and charge it with the Micro-USB cable. The first time, charge at least 3 hours.
Close and insert
Turn the lid back clockwise and the module switches on. Put it back into Raider the right way round.
Screw it on
Screw Raider onto your gun's 14 mm counter-clockwise (M14−) thread.
| Inner barrel past the thread | Blaster M |
|---|---|
| Less than 10 mm | Clear of the sensor |
| 10 mm or more | Covers the sensor: 3 beeps every 2 seconds, shuts down after 3 warnings |
Measure from the end of the thread to the end of the inner barrel.
In the box
- Raider · Blaster M module inside
- Micro-USB to USB-A cable
- User manual
Read the Raider user manual (PDF) before you fit it.
BBs it lights
- Green tracer BBs
- Gel BBs
- Standard BBs
- Red tracer BBs · not supported
Need tracer BBs? See our tracer BB balls. Choose green: red tracer BBs don't light up.
Wakes when you move
Blaster M wakes when you shake the gun and sleeps after 5 minutes without movement. While it charges, its light shows how full the battery is.
Power
- Shake to wake
- Sleeps after 5 minutes idle
- Turned off with the button · shake to wake stays off
- Up to 35 rounds per second
- Low battery · red light, 3 flashes, then off
- UV LED + flame flash LED · in Blaster M
- Blaster M module · 30 × 54 mm, 31 g
- IP64 · Blaster M with its lid screwed tight
The light breathes while Blaster M charges and goes off when charging is complete.
Our Blaster tracers
Raider and Predator MKIII Blaster MS both carry a Blaster M module. Blaster and Blaster C are compact units of their own.
Raider + Blaster M
Breaching-brake shell, 96 × 39.2 mm. Tracer, flame or both. Green tracer and gel BBs.
You are herePredator MKIII Blaster MS
Predator MKIII shell, 139.3 × 42 mm, with a Blaster M module. Up to 35 RPS. Green tracer and gel BBs.
ACETECH · M14− to M11+ adapterBlaster
Compact Blaster unit. Tracer only, tracer with flame or flame only. Green tracer and gel BBs.
ACETECH · IP65Blaster C
Aluminium, five colours, muzzle flash effect. Standard, green tracer and gel BBs. M14− to M11+ adaptor included.
Safety: Airsoft guns are not toys. Everyone on the field must wear eye protection.
All tracer units